2018-2019
|
S. No. |
Name of the Faculty (all coauthors) |
Title of the paper |
Name of the Journal Vol. No, pages and IF |
|
1. |
N.Muthukrishnan M. Nareshbabu |
Experimental analysis in drilling of AA 5052 using copper nanofluids under minimum quantity lubrication |
Australian journal of Mechanical Engineering DOI: 10.1080/14484846.2018.1455267 |
|
2. |
N.Muthukrishnan M. Nareshbabu V.Anandan M.Gajendran |
Experimental process to evaluate the minimum quantity lubrication technique using copper nanofluids in turning process |
International journal of Machining and machinability of materials Vol:20, No:6, 2018 |
|
3. |
N.Muthukrishnan S.Muniraj |
Modelling and analysis of energy conservation in turning of lead free micro alloyed steel using D-optimal design |
International journal- Progress in Industrial Ecology Vol:11, No:3, 2017 |
|
4. |
N.Muthukrishnan M. Nareshbabu Santhanakumarmuthuvel |
Copper nano fluids under minimum quantity lubrication during drilling of AISI 4140 STEEL |
Australian journal of Mechanical Engineering DOI: 10.1080/14484846.2018.1486694 |
|
5. |
N.Muthukrishnan M. Nareshbabu Santhanakumar K.Ganesan |
Experimental investigation of copper nanofluid based minimum quantity lubrication in turning of H 11 steel |
Journal of the Brazilian society of Mechanical sciences and Engineering DOI: 10.1007/s40430-018-1093-9 Impact factor – 1.627 |
|
6. |
Gopinath S, Balan SK, Ramanathan, M &Narashiman K, |
Measure of Utilisation of Government Schemes & Support by Small and Medium Enterprises (SME): Service Providers Perspective’ |
Applied Mechanics and Materials, vol. 867, pp. 283-289,2017 ISSN:1662- 7482, SJR Index:0.11, |
|
7. |
Gopinath, S, Vikram, H ,Vaidya, GR &Narashiman, K |
Human Resource Risk Management in Small and Medium Enterprises |
World Applied Sciences Journal,vol.35,no.5,pp 718-722, 2017, |
|
8. |
Gopinath, S, Sanjay Ram, S &Narashiman, |
An Empirical Study of Operations Risk Management in Small and Medium Enterprises in India |
Middle-East Journal of Scientific Research, vol. 25, no.5, pp. 960-965, 2017,.ISSN 1990-9233, SJR Index: 0.160 |
|
9. |
Gopinath, S, Sundaram, AVR, Sheshathri, R &Narashiman, K.
|
Framework of Conceptual Model for Quality Management in Small and Medium Enterprises (SME)’,
|
International Journal of Enterprise Network Management, vol.9,no.2,pp 143-155, ISSN:17481260, SJR Index:0.118 |
|
10. |
Nishal M, Ramprasad K, Arun Theja A J, Ajayy S , Saravanan S and Abhishek S |
Need for total EED for total productive maintenance in SME AND Barriers in implementing TPM in SME |
International Journal of Mechanical and Production Engineering, ISSN(p): 2320-2092, ISSN(e): 2321-2071 |
|
11 |
Nishal M Ramprasad K Arunram S P Adithya M |
Improving efficiency of Wheel cylinder assembly unit Value stream Mapping (VSM)- A Case Study |
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN (P): 2249-6890; ISSN (E): 2249-8001 Vol. 8, No.8, pp.45-51, 2018.
|
|
12 |
Gurusamy V Pitchandi K, Muthukrishnan N |
Optimization of LASER Texturing Process Parameters to Maximize the ultimate tensile strength of LASER Textured AZ31B Magnesium Alloy made by cold metal transfer welding using response surface Methodology |
Journal of the Balkan Tribological Association Vol. 25, No 1, pp.83–98 , 2019 |
|
13 |
Govindaraj K and Prem Ananth M |
Effect of Dimple Geometry and Wear Performance of DLC Coating on uni-directional sliding contact conditions |
International Journal of Mechanical and Production Engineering Research and Development ISSN (P): 2249-6890; ISSN (E): 2249-8001 Vol. 8, No.8, Aug 2018, pp.420-4252. |
|
14 |
Senthil Kumar A, Sathya Sai Prasath. R. N, Sandeep Raghavan T, M. Prem Ananath |
Tribological Analysis of Coated Aluminum Alloy Substrate with surface Texturing |
International Journal of Mechanical and Production Engineering Research and Development ISSN (P): 2249-6890; ISSN (E): 2249-8001 Vol. 8, No.8, Aug 2018, pp.120-127 |
|
15 |
Ponnuvel S and Prem Anaanth M |
Effect of specific surface area of MWCNTS on surface roughness and delamination in drilling Epoxy/Glass Fabric Composite |
Materials Research Express 5 (2018) 035310 https://doi.org/10.1088/2053-1591/aab647 II Rs.2000/- Impact Factor :1.151 |
|
16 |
Ponnuval , S and Senthilkumar N |
A study on machinability evaluation of Al-Gr-B4C MMC using response surface methodology-based desirability analysis and artificial neural network technique |
International Journal of Rapid Manufacturing, Vol. 8, Nos. 1/2, 2019 DOI: 10.1504/IJRAPIDM.2019.097030
|
|
17 |
S.Saravanan B. Rajesh Kumar Melvin Victor De Poures, Sathiyagnanam A P and Rana D |
1-Hexanol as a sustainable biofuel in DI diesel engines and its effect on combustion and emissions under the influence of injection timing and exhaust gas recirculation (EGR) |
Applied Thermal Engineering 113 :pp.1505–1513 Impact factor :3.771
|
|
18 |
S.Saravanan S Rajesh Kumar B Damodharan D, Sathiyagnanam A P , Rana D Sethuramasamyraj B |
Effective utilization of waste plastic oil in a direct injection diesel engine using high carbon alcohols as oxygenated additives for cleaner emissions |
Energy Conversion and Management 166:pp.81–97 Impact Factor: 5.589 |
|
19 |
Saravanan S Rajesh Kumar B Dhanasekaran, R and Ganesan S |
Utilization of waste cooking oil in a light-duty DI diesel engine for cleaner emissions using bio-derived propanol |
Fuel 235: pp.832–837 Impact Factor :4.601
|
|
20 |
Saravanan S Nandakumar, H |
Simulation Of Various Engine Parameters Of PPCI Engine For Nox Control |
IJCRT, 6(2) |
|
21 |
Saravanan S Kaliyanasunder R, SujaiPandian S P |
Experimental Investigation on Of PPCI Engine Fuelled With Diesel And Butanol Blends |
International Journal of Mechanical and Production Engineering Research and Development Vol. 8,(8):pp.33-37 |
|
22
|
Saravanan S Rajesh Kumar B Melvin Victor De Poures, Sathiyagnanam A.P., RanaDipak Balaji Sethuramasamyraja Damodharan D
|
Using renewable n-octanol in a non-road diesel engine with some modifications
|
Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 41:pp.1194–1208 Impact factor :0.555 |
|
23 |
A.Rajaram,VSubash, K.Surendar, P Raghu |
Optimization of spray characteristics by response surface methodology,
|
|
|
24 |
P.Raghu, A.J ArunTheja, G. Ashwin Raj, T.G AdithyaArvind |
Study of Spray Breakup Regimes of Preheated Biodiesel Fuel |
International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE)Vol 3, Issue 2,pp.150-154, Impact Factor 3.8 |
|
25 |
M.Dyanesh, NishanthPaul.V, GirishEthiraj, P Raghu |
Numerical Simulation for Spray Characteristics of Diesel and Biodiesel fuel |
International Research Journal of Engineering and Technology Volume: 05 Issue: 03, pp.2812-2815, Impact Factor 6.171 |
|
26 |
P. Vengatesh, P. Raghu, N. Nallusamy,
|
Spray Characteristics of Diesel Fuel Using Numerical Simulation, |
International Research Journal of Engineering and Technology, Vol.5, No.4, pp.2812-2815. |
|
27 |
N.SankaraManikandan, P V Lakshman, Ramesh Rajesh,andP Raghu |
Optimization Of Fuel In Diesel Engines,
|
International Journal Of Science And Innovative Engineering &Technology, Vol.1, May 2018. |
|
28 |
Raghu P, Sundarrajan R, Rajaaraman R M. Ramaswamy M and Sathyanarayanan S
|
Heat Transfer investigation on a single Cylinder Diesel Engine using Diesel and Biodiesel
|
International Journal of Mechanical and Production Engineering Research and Development ISSN (P): 2249-6890; ISSN (E): 2249-8001 Vol. 8,No. 8, pp.120-127, Aug 2018.
|
|
29 |
Antony V, Immanuel Akash, Ganesh raj M,Kumaresh V, Bharath Kumar S and Raghu P
|
The Design and Fabrication of Crushing Machine using Double Toggle Mechanism
|
International Journal of Industrial Engineering and Technology ISSN (P): 2277-4769 ISSN (E): 2278-9456 Vol. 8, No.2,pp.7-12, Dec 2018. |
|
30 |
Arumugam S, ArunTheja A J , Dyanesh MAbishek S and Nisanth Paul V |
Optimization of spray characteristics using multi Response signal to noise ratio in high pressure Chamber |
International Journal of Mechanical and Production Engineering, ISSN 2321-2071, Vol.6, No.7, pp 45-50, July 2018. |
|
31 |
S.Arumugam, K.PitchandiT.N.S.Varadhachari |
Spray analysis in a high pressure chamber with diesel and biodiesel |
Asian Journal of Science and Technology, ISSN 0976-3376, Vol.9, No.9 pp: 8676-8679, Sep 2018. |
|
32 |
C.Senthamaraikannan and Dr.R.Ramesh |
Evaluation of mechanical and vibration behavior of hybrid epoxy carbon composite beam carrying micron-sized CTBN rubber and nanosilica particles
|
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications https://journals.sagepub.com/doi/abs/10.1177/1464420718784315. Impact Factor : 1.28 |
|
33. |
R.Kumutha S.Ilaiyavel |
Study of Tribological behavior of conversion coated high Carbon high Chromium Steel
|
International Journal of Mechanical and Production Engineering Research and Development Vol. 8,No.8,pp.214-220, Aug 2018. Impact Factor : 1.28
|
|
34 |
S Arumugavel S Ilaiyavel |
Study of erosion and corrosion behavior of Alumina and Zirconium coating on Stainless Steel |
International Journal of Mechanical and Production-Engineering Research and Development Vol. 8, No.8, pp.214-220,2018 |
|
35 |
Karthee. K, chathur vel. R &yeshwant raj. S |
Identifying opportunity for improvement for industries using multi-criteria decision making (mcdm) through internet of things (iot), |
International journal of mechanical and production engineering research and development transstellar, Vol.8, No.8, pp.128-132, 2018 |
|
36 |
Karthee. K, vishalsankar. S &yeshwant raj. S |
A review on rapid prototyping (rpt): recent trends, future & influence of internet of things (iot)/ cloud manufacturing (cm) |
International journal of mechanical and production engineering research and development transstellar, Vol.8, No.8, pp.128-132, 2018 |
|
37 |
Yeshwant raj. S, karthee. K, arvind. D &ashwin. R |
Increasing the efficiency of regenerative air preheater (raph) through leakage reduction by retrofitting the radial and axial seals |
International journal of mechanical and production engineering research and development transstellar, Vol.8, No.8, pp.128-132, 2018 |
|
38 |
Karthee k, Vishal Sankaryeshwant raj. S. |
Improvement of overall performance of Micro/Small Industries (MSSI) using Multi-Criteria decision making (MCDM) |
IOPCON.SER Mat.Sci.Engg..402 012119 pp.1-11, 2018. |
|
39
|
Anish A andAnanth Kumar M |
Characterization of aluminium matrix reinforced with tungsten carbide and molybdenum disulphide hybrid composite |
IOP Conf. Series: Materials Science and Engineering 402 (2018) 012006 doi:10.1088/1757-899X/402/1/012006 |
|
40 |
S.Natarajan,V.J.Samnivethan, and Pitchandi K
|
Optimization of Parameters on Direct Injection Compression Ignition Engine fuelled with Acacia Nilotica Biodiesel blends
|
International Journal of Mechanical and Production Engineering Research and Development Vol.8,No.8, pp.77-85, Aug. 2018.
|
|
41 |
S.Natarajan , Arunram S P, Samnivethan V J and Pitchandi K.
|
Impact of Acacia nilotica on Performance Combustion And Emission Characteristics in Compression Ignition Engine
|
International Journal of Mechanical and Production Engineering Research and Development Vol. 8, No.8, ,pp.38-44 , 2018. |
|
42 |
Alfred V , Franklin M. ChenthilJegan G B , . Bhaskar Mohandass M and Vasudevan N
|
Fracture Strength evaluation of composite lamination using modified WEK Model
|
International Journal of Mechanical and Production Engineering Research and Development ISSN (P): 2249-6890; ISSN (E): 2249-8001 Vol. 8, No. 8, pp.345-351, Aug 2018, |
|
43 |
ThirumalaiKannan K and Ramesh Babu S |
Tribological properties of modified jojoba oil as probable base stoke ofengine lubricant |
Journal of Mechanical Science and Technology, Vol.32, No.4 pp.1739-1747 , 2018. Impact Factor 0.55 |
|
44 |
Ramesh Babu S, Deepak Kumar J K Kavin Kumar K N and Badrinarayanan R |
Mechanical Characterization of cold metal transfer Butt Welded AA 6061-T6 Aluminum Alloy |
International Journal of Mechanical and Production ISSN(E): 2249-8001 |
|
45 |
Thirumalai K Kannan S and Ramesh Babu S |
Effect of Nano particles in modified vegetable oil using response surface methodology
|
International Journal of Mechanical and Production Engineering Research and Development Vol. 8, No.9, pp.439-444, Dec 2018. |
|
46. |
Gopinath S, Ramanathan M ArunSankar N and Narasimhan K |
Supply Chain issues in Medium scale Auto component manufacturers: Case Study Approach |
Middle East Journal of Scientific Research, Vol.24, pp. 245-249, 2016. |
2017-2018
|
S.No. |
Name of the Faculty(all coauthors) |
Title of the paper |
Name of the Journal Vol. No, pages and IF |
|
1 |
M. Prem Ananth, R. Ramesh
|
Sliding Wear Characteristics Of Solid Lubricant Coating On Titanium Alloy Surface Modified By Laser Texturing And Ternary Hard Coatings |
Trans. Nonferrous Met. Soc. China, Vol. 27 pp.839−847, 2017.
Impact Factor : 1.523 |
|
2 |
N.Muthukrishnan and S.Muniraj |
Modeling And Analysis On Influential Machining Parameters Of 38mnsivs5 Micro Alloyed Steel By D-Optimal Design |
International Journal Of Manufacturing Technology And Management ( Article In Press) |
|
3 |
N.Muthukrishnan and M.NareshBabu
|
Exploration Of Kerf Angle And Surface Roughness In Abrasive Water Jet Machining Using Response Surface Method |
Journal Of The Institute Of Engineers (India) Series C (2017) Doi.Org/10.1007/S40032-017-0366-X |
|
4 |
N.Muthukrishnan M.NareshBabu
|
Experimental Estimation Of Minimum Quantity Lubrication In Turning On AISI 410 Stainless Steel |
International Journal Of Machining and Machinability Of Materials,Vol.19,pp.522-537, 2017. |
|
5 |
S. Yeshwant Raj, Sughosh S.D &Sedhuraman M.J |
Prioritizing Critical Factors For Establishing An Automotive Component Manufacturing Facility: An AHP-Pareto Approach |
Journal Of Advanced Research In Dynamical And Control Systems, Vol.11, pp.448-459, 2017. |
|
6 |
S. Yeshwant Raj, K.Karthee,KalyanaSundaram, M.Nishal and K.Ram Prasad |
Increasing Reliability And Productivity In Hypermarkets By Queuing Theory Analysis And A Smart Shopping Cart-Based System |
International Journal Of BusinessExcellence,Vol14, No.4,pp.545-556,2018 |
|
7 |
K.Pitchandi S.Natarajan
|
Optimization Of Performance And Emission Characteristics Of Ppcci Engine Fuelled With Ethanol And Diesel Blends Using Grey-Taguchi Method |
Journal Of Thermal Science, Vol.27, No.1 (2018) pp.89 – 94, 2018. Impact Factor: 0.678 |
|
8 |
Pitchandi K Mothilal T
|
Computational Fluid Dynamic Analysis On The Effect Of Particles Density And Body Diameter In A Tangential Inlet Cyclone Heat Exchanger |
Thermal Science , Vol. 21, No. 6b Pp. 2883-2895 Year 2017
Impact Factor: 1.093 |
|
9 |
T.Mothilal, K.Pitchandi,V.Velukumar, k.Parthiban |
CFD and Statistical Approach for Optimization of Operating Parameters in a Tangential Cyclone Heat Exchanger |
Journal of Applied Fluid Mechanics, Vol.11, No.2, pp.459-466, 2018. |
|
10 |
Pitchandi K Arumugam S |
Study Of Combustion And Emission In Dici Engine With Pent Roof And Spherical Combustion Chambers |
Taga Journal of Graphic Technology, Vol 14, 833-839, 2018. |
|
11 |
P.Raghu, S. Krishna Sagar, R. Sabarinath M. Gowtham AKBoobalasenthilraj |
Optimisation Of Spray Parameters Of Diesel and Biodiesel Fuels Using Multi-Response Signal to Noise (Mrsn)Ratio |
International Journal Of Science And Innovative Engineering & Tech. Impact Factor : 4.321 |
|
12 |
P.Raghu Ganesh Kumar. S Pitchandi. K Nallusamy. N |
Spray Characteristics Of Chicha Oil Methyl Ester Anddiesel Fuel In A Constant Volume Chamber |
International Journal Of Advanced Research In Basic Engineering Sciences and Technology Impact Factor: 5.023 |
|
13 |
P.Raghu S. Krishna Sagar R. Sabarinath M. Gowtham A.K.Boobalasenthilraj |
Experimental Investigation On Fuel Spray Parameters And Characteristics Of Diesel And Bio-Diesel Blend |
International Journal Of Advanced Research In Basic Engineering Sciences and Technology Impact Factor: 5.023 |
|
14 |
P.Raghu Ganesh Kumar.S Nallusamy.N
|
Dimensionless Analysis Of Spray Characteristics Of Chicha Oil Methyl Ester And Diesel Fuel In A Spray Chamber |
Progress In Industrial Ecology-An International Journal (Article Inpress) |
|
15 |
S.Natarajan Abhinav Shankar
|
Early Injected Pcci Engine Fuelled With Bio Ethanol And Diesel Blends-An Experimental Investigation |
Energy Procedia, Vol.105, pp.358-366,2017.
Impact Factor: 1.16 |
|
16 |
S.Natarajan Akshaykumar
|
Computational Analysis Of An Early Direct Injected Hcci Engine Fuelled With Bio Ethanol And Diesel Blends |
Energy Procedia,Vol.105, ,pp.350-357,2017.
Impact Factor: 1.16 |
|
17 |
S.Natarajan Akashtrasy Srihari.N Raja.S |
Effects Of Injection Timing On Ci Engine Performance Fuelled With Algae Oil Blend Using Taguchi Analysis |
Energy Procedia, Vol.105, pp.1043-1050,2017.
Impact Factor: 1.16 |
|
18 |
B. Rajesh Kumar, S. Saravanan, BalajiSethuramasamyraja, D. Rana |
Screening Oxygenates For Favorable Nox/Smoke Trade-Off In A Di DieselEngine Using Multi Response Optimization |
Fuel, Vol.199, pp.670–683, 2017.
Impact Factor :4.601 |
|
19 |
S. Saravanan B. Rajesh Kumar A. Varadharajan D. Rana, Balaji Sethuramasamyraj G. Lakshmi NarayanaRao |
Optimization Of Di Diesel Engine Parameters Fueled With Iso-Butanol/Diesel Blends – Response Surface Methodology Approach
|
Fuel, Vol.203, pp.658–670, 2017.
Impact Factor :4.601
|
|
20 |
B. Rajesh Kumar S.Saravanan |
Diesel Reformulation Using Bio-Derived Propanol To Control Toxic Emissions From A Light-Duty Agricultural Diesel Engine |
Environmental Science and Pollution Research,Vol.24, No.20,pp.16725-16734, 2017 Impact Factor :2.760 |
|
21 |
V.Krishnamoorthya, R.Dhanasekarana, D. Rana, S. Saravanan and, B. Rajesh Kumar |
A Comparative Assessment Of Ternary Blends Of Three Bio-Alcohols With Waste Cooking Oil And Diesel For Optimum Emissions And Performance In A CI Engine Using Response Surface Methodology |
Energy Conversion And Management, Vol.156,pp: 337-357, 2018.Impact Factor : 5.589 |
|
22 |
D. Damodharana, A.P.Sathiyagnanam, D. Rana, B. Rajesh Kumar and S. Saravanan |
Combined Influence Of Injection Timing And Egr On Combustion, Performance And Emissions Of Di Diesel Engine Fueled With Neat Waste Plastic Oil |
Energy Conversion and Management, Vol.161, pp.294–305, 2018. Impact Factor : 5.589 |
|
23 |
S.Saravanan K.PaulDurai I.MeenakshiSundaram
|
Comparison Of Combustion Characteristics Of An Automotive Crdi Engine With Conventional Hcv Engine |
Int. J. Oil, Gas And Coal Technology Impact Factor : 0.5 (In Press) |
|
24 |
K.Gopal, A.P.Sathyagnanam, B.Rajesh Kumar, S.Saravanan, D.Rana B.Sethuramasamyraj |
Prediction Of Emission And Performance Of A Diesel Engine Fuelled With N-Octanol/Diesel Blends Using Response Surface Methodology |
Journal of Cleaner Production, Vol.184, pp.423-439, 2018.
Impact Factor :5.715 |
|
25 |
Vimal, KEK, VinodhS.and Jayakrisha K |
Application Of Fuzzy Qfd For Improving The Process Sustainability Characteristics: A Case Study
|
International Journal Of Services And Operations Management (In Press)
|
|
26 |
Jayakrisha K, Vinodh, S., and Vimal, KEK |
A Conceptual Framework For The Assessment Of Sustainability Indicators Using If-Then Rules Approach: A Case Study |
International Journal Of Services And Operations Management (In Press) |
|
27 |
Vimal, KEK, Vinodh, S., and Anand G |
Modelling And Analysis Of Sustainable Manufacturing System Using A Digraph-Based Approach |
International Journal Of Sustainable Engineering (In Press) No. 1939-7038
|
|
28 |
S.Ilaiyavel and K.Senthilnathan
|
Experimental Investigation Of Polymer Matrix Composite Gears With Different Fiber Proportions |
International Journal Of Advanced Research In Mgmt.Architecture,Techand Engg.,Vol.3, No.9,pp.80-84, 2017. Impact Factor: 4.02 |
|
29 |
S.RameshBabu, M. Nithin, S. Pavithran, B. Parameshwaran |
Friction Stir Spot Welding Of Az31b Magnesium Alloy” |
Applied Mechanics and Materials Journal, Vol. 867, pp.105-111,2017. |
|
30 |
S. Ramesh Babu and ThirumalaiKannan |
Tribological Behavior Of Modified Jojoba Oil With Graphene Nanoparticle As Additive In Sae20w40 Oil Using Pin On Disc Tribometer |
Energy Sources, Part A: Recovery, Utilization and Environmental Effects, Vol. 39, No.17, pp.1842 - 1848 |
2016-2017
|
S. No. |
Name of the faculty with coauthors |
Title of the paper |
Name of the Journal and details |
|
1. |
S.Yeshwant Raj, Himanshu Gupta |
Systematic retrofit methodology for chemical batch processes to improve economic and production performance
|
Int. J. Business excellence, Vol. 10, 2016. Impact factor : 0.81 |
|
2. |
S.Yeshwant Raj, P Selva Kumar, R Sairam, G Sathish |
A Quantitative Analysis of 3PL Providers and Their Workload in Automotive Industries |
Middle-east journal of scientific research, Vol.24,pp.149-154, 2016 |
|
3. |
Karthee K, S.Yeshwant Raj, Prithvi Govind |
Multi-Criteria-Based Prioritization of Threats Affecting Sustainability of Micro and Small Scale Industries Using AHP and Mitigating the Major Threats Using Retrofitting
|
International Journal of Mechanical Engineering and Robotics Research Vol. 6, 2017 |
|
4. |
S.Arumugam, K.Pitchandi, J.Venkatesan, P.Karthikselvan |
Experimental and mathematical modeling in a DICI engine with Spherical and Toroidal combustion chambers |
TIDEE (TERI Information Digest on Energy and Environment), Vol.15, Issue: 1 , pp:11-17, 2016. |
|
5. |
S.Arumugam, K.Pitchandi, P.Karthikselvan R.J.Ganesh |
Design and fabrication of High pressure Diesel spray Chamber |
Middle East Journal of Scientific Research, Vol.24, pp.2948-2951, 2016. |
|
6. |
S.Arumugam, K.Pitchandi, P.Karthikselvan |
Effect of Karuvel methylester in a DICI engine Spherical and Toroidal combustion chambers |
Asian Journal of Research in Social science and Humanities. Accepted on 26.11.2016 and to be published in March 2017 |
|
7. |
S.Arumugam, K.Pitchandi, P.Karthikselvan |
Experimental and mathematical modeling in a DICI engine with various combustion chambers |
Journal of Chemical and Pharmaceutical Sciences Vol. 9, pp: 809-812,2016. |
|
8. |
K.Palani Kumar, A Shadrach Jeya Sekaran, K Pitchandi |
Investigation on mechanical properties of woven alovera/sisal/kenaf fibres and their hybrid composites
|
Bull. Mater. Sci., Vol.40, pp. 117-128, 2017. Impact factor : 0.895 |
|
9. |
R.Sathiyamoorthi G.Sankaranarayanan, K.Pitchandi |
Combined effect of nanoemulsion and EGR on combustion and emission characteristics of neat lemongrass oil (LGO)-DEE-diesel blend fuelled diesel engine |
Applied Thermal Engineering, Vol.112,pp.1421-1432, 2017. Impact factor : 3.043 |
|
10. |
Srivathsan.A, B.Vijayaram, R.Ramesh, Gokuldass |
Investigation on Mechanical Behaviour Of Woven Fabric Glass/Kevlar Hybrid Composite Laminates Made Of Varying Fibre Inplane Orientation And Stacking Sequence |
Materials Today Procedings, Elseveir, Accepted for Publication |
|
11. |
K.Madhivanan, M.Senthilkumar, R.Ramesh |
Vibration Signal Responses Classification in AA6063 Aluminium Alloy Friction Stir Welded joint Using Optial Neural Network |
International Journal of Business Intelligence and Data mining, Inderscience Publishers, Accepted for publication.
|
|
12. |
B.Rajesh Kumar, T.MuthuKkumar, V.Krishnamoorthy S.Saravanan |
A Comparative Evaluation and optimization of performance and emission characteristics of a DI diesel engine fueled with n-propanol/diesel, n-butanol/diesel and n-pentanol/diesel blends using response surface methodology |
RSC Advances. Vol.6, 19 2016 Impact factor : 3.289 |
|
13. |
D.Damodharan, A.P.SathiyagnanamD.Rana, B.Rajesh Kumar, S.Saravanan |
Extraction and characterization of waste plastic oil (WPO) with the effect of n-butanol addition on the performance and emissions of a DI diesel engine fueled with WPO/diesel blends |
Energy Conversion and Management, Vol.131, pp.117–126, 2017 Impact factor : 4.801 |
|
14. |
B.Rajesh Kumar, S.Saravanan, D.Rana, A.Nagendran |
Combined effect of injection timing and exhaust gas recirculation (EGR) on performance and emissions of a DI diesel engine fuelled with next-generation advanced biofuel-diesel blends using response surface methodology |
Energy Conversion and Management, Vol. 123, pp: 470–486, 2016. Impact factor : 4.801 |
|
15. |
B.Rajesh Kumar, S.Saravanan, D.Rana, A.Nagendran |
Use of some advanced biofuels for overcoming smoke/NOx trade-off in a light-duty DI diesel engine |
Renewable Energy, Vol.96,pp. 687-699, 2016. Impact factor : 3.404
|
|
16. |
B.Rajesh Kumar, S.Saravanan, R.Niranjan Kumar, B.Nishanth, D.Rana, A.Nagendran |
Effect of lignin-derived cyclohexanol on combustion, performance and emissions of a direct-injection agricultural diesel engine under naturally aspirated and exhaust gas recirculation (EGR) modes |
Fuel; Vol.181, pp.630–642, 2016. Impact factor : 3.611 |
|
17. |
B.Rajesh Kumar, S.Saravanan, D.Rana, A.Nagendran |
A comparative analysis on combustion and emissions of some next generation higher-alcohol/diesel blends in a direct-injection diesel engine
|
Energy Conversion and Management, Vol.119, pp: 246–256, 2016. Impact factor : 4.801 |
|
18. |
B.Rajesh Kumar, S.Saravanan, D.Rana, V.Anish, A.Nagendran |
Effect of sustainable biofuel –n-octanol- on the combustion, performance amd emissions of a DI diesel engine under naturally aspirated and exhaust gas recirculation (EGR) modes |
Energy Conversion and Management, Vol.118, pp. 275–286, 2016.Impact factor : 4.801 |
|
19. |
B.Rajesh Kumar, S.Saravanan |
Partially premixed low temperature combustion using dimethyl carbonate (DMC) in a DI diesel engine for favourable smoke/NOx emissions |
Fuel, Vol.180, pp: 396–406, 2016. Impact factor : 3.611 |
|
20. |
R.Dhanasekaran V.Krishnamoorthy, D.Rana, S.Saravanan, A.Nagendran, B.Rajesh Kumar |
A sustainable and eco-friendly fueling approach for direct-injection diesel engines using restaurant yellow grease and n-pentanol in blends with diesel fuel |
Fuel, Vol.193, pp.419–431, 2017. Impact factor : 3.611 |
|
21. |
J.Ravikumar, S.Saravanan |
Performance and emission analysis on blends of diesel, restaurant yellow grease and n-pentanol in direct-injection diesel engine |
Environmental Science and Pollution Research, doi: 10.1007/s11356-016-8298-1 Impact factor:2.76 |
|
22. |
S.Gopinath, M.Ramanathan, N.Arul Sankar, K.Narasimhan |
Supply Chain Issues in Medium Scale Autocomponent Manufacturers: Case Study Approach
|
Middle-East Journal of Scientific Research, Vol.24,pp:245-249, 2016. |
|
23. |
S.Gopinath, Srivats Balan.K Ramanathan.M, Narasimhan.K |
Measure of Utilization of Government Schemes and Support by Small and Medium Enterprises(SME): Service Providers Perspective |
Applied Mechanics and Materials ISSN: 1662-7482, Trans Tech Publications (Accepted for Publishing) |
|
24. |
P.Raghu, N.Nallusamy |
Spray Characteristics of Biodiesel Fuel in Constant Volume Chamber using Multi-response Optimization Technique |
Journal of Thermal Science. Vol.25, pp: 581-588, 2016 Impact factor : 0.543 |
|
25. |
P.Raghu, R.Parthiban, K.Pitchandi, N.Nallusamy |
Multi response optimization of spray characteristics of biodiesel in constant volume chamber |
Journal of Chemical and Pharmaeutical Research, Vol.8, pp. 726-732, 2016. |
|
26. |
S.Ponnuvel, T.V.Moorthy, P.Hariharan |
Effect of Multi-Walled Carbon Nanotubes on Surface Roughness and Material Removal Rate in Drilling Epoxy/Glass Fabric Composite |
Journal of the Balkan Tribological Association. Vol. 22. 2016 Impact factor : 0.321 |
|
27. |
J.Raju, A.Balasubramaniam, M.Gajendiran, N.Madhan Raj |
Investigation of Performance and Emission Characteristics using Low Reactivity Fuel and Biodiesel Blended Nanoparticles in Diesel Engine |
International Journal of Engineering Research and Technology. Vol.5, 2016. |
|
28 |
M.Arulkumar T.Arjun |
Design of Single Axis Solar Tracking System Using PLC |
Middle-East Journal of Scientific Research, Vol. 24, pp.1-5, 2016.
|
|
29 |
M.Arulkumar Vijey V.S Uthish Shankar.S |
Design And Analysis of A Three Fingered Robotic Arm |
International Journal of Advanced Technology in Engineering and Science, Vol.4, 2016. |
|
30 |
Sakthivel.K Prem Ananth.M |
Analytical Investigation of Tribological Performance of DLC Coating |
International Journal of Emerging Trends in Science and Technology, Vol.3, pp.24-27, 2016. |
|
31 |
S.Ilaiyavel, Vijayasarathi, P Suresh Prabhu,P |
Experimental investigation of wear characteristics on TiCN-coated AISI 410 steel’, Materials Science & Processing |
Appl. Phys., A, vol. 122, pp. 1-8. Impact factor : 1.444 |
|
32 |
Vijayasarathi, P, Ilaiyavel, S, Suresh Prabhu,P |
Evaluation of sliding wear resistance of PVD coatings by the ball-cratering test method |
Journal of Engineering Materials and Technology Impact factor : 0.908 |
|
33 |
Vijayasarathi, P, Ilaiyavel, S, Suresh Prabhu,P Sornakumar T |
Wear Characteristics of AlCrN Coating on AISI410 steel by Ball-Cratering Test Method
|
Industrial Lubrication and Tribology Impact factor : 0.406 |